oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if92.4m-03a 92.4mhz if saw filter 3.95 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if92.4m-03a january 2011 rev a 92.4mhz if saw filter 3.95 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=82nh output l2=82nh source/load impedance 50 ?
oscilent part number 835-if92.4m-03a january 2011 rev a 92.4mhz if saw filter 3.95 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 80 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 92.4 - insertion loss at fo db - 23.5 25.0 group delay variation (fo1.92mhz) ns - 111 120 absolute delay time at fo us - 5.68 - temperature coefficient ppm/ c - -20 - amplitude ripple (fo1.92mhz) db - 0.92 - bandwidth at -1.0db mhz 3.84 3.95 - bandwidth at -3.0db mhz - 4.13 - bandwidth at -40db mhz - 4.87 - bandwidth at -50db mhz - 4.93 5.0 ultimate rejection - 50 55 -
oscilent part number 835-if92.4m-03a january 2011 rev a 92.4mhz if saw filter 3.95 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db bandwidth at ?50.0 db
oscilent part number 835-if92.4m-03a january 2011 rev a 92.4mhz if saw filter 3.95 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo1.92mhz group delay variation fo1.92mhz smith chart
oscilent part number 835-if92.4m-03a january 2011 rev a 92.4mhz if saw filter 3.95 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
